Tag Archives: ipv6

Providing IPv6 DNS resolver data with radvd

One nagging issue I had with IPv6 was how to distribute DNS server addresses and search lists to my clients.   It took a little research to find the solution.  On IPv4 I had been using DHCP to do this, but DHCP didn’t seem to be right approach for IPv6. radvd can be used to distribute both types of data.  The following article covers setup on Ubuntu and OpenWRT.  The Ubuntu (Debian) examples below should work with any distribution using/etc//radvd.conf to configure radvd. Continue reading

Implementing IPv6 Part 2

We are quickly running out of IPv4 addresses. Are you ready for World IPv6 Day on June 8th, 2011? I have prepared my configuration on OpenWRT and Ubuntu. This includes configuring DNS using bind, email using Exim, and a Squid web proxy.

Having verified that I could establish IPv6 connectivity, I chose to improve my connectivity. This started with getting a tunnel from Hurricane Electric and updating my configuration. I then updated my bind server and Exim mail server support IPv6 addresses. This posting updates and continues from my post on Implementing IPv6 6to4 on OpenWRT.   Review it for information on creating a tunnel and running radvd on OpenWRT. Continue reading

Implementing IPv6 6to4 on OpenWRT

As the IPv4 addresses begins to run out I finally invested the time to investigate and implement IPV6. As my ISP has not yet announced availability of IPV6 addresses I chose to implement a 6to4 tunnel. This is simple to implement, and currently well supported. My external firewall is an ASUS wireless router running OpenWRT.  As I have a static IP address, my implementation is simpler than is required by a dynamic address.  Support for dynamic IPv4 addresses is not covered here, but this configuration should work as long as your address does not change.

I initially created a 6to4 implementation without a firewall.  Then to secure my systems I implemented a firewall using Shorewall6-lite.  Until I figured out how to configure the 6tunnel script, I used the command line to bring up the network.  This documentation uses of the 6tunnel script instead of the manual commands.  My configuration does not yet include any IPsec functionality. Continue reading